Unraid on UGREEN. Done right.

iDX6011 / iDX6012 / Pro

Six bays, two M.2 slots, a display at the front (Pro: 3.7 inch LCD), two 10G LAN ports, two Thunderbolt 4 ports, OCuLink. Fan control on the Pro only; the plain iDX6011 and iDX6012 show fan readings only (read-only).

Expected: Nothing confirmed yet.

• LEDs: Expected
  Bay order (Pro: bays 3-4 on the Intel controller, plain iDX6011 and iDX6012: bays 5-6) follows the MIT-licensed plugins noodlemctwoodle/unraid-ugreen-idx6011-pro and omgapuppy/unraid-ugreen-idx6011-led-fan; not checked on a device with this plugin, use Identify to confirm. LED chip 0xc5b2. The Pro has a second LAN LED (register 2, `netdev2` in ugreen-led-i2c, from the driver UGREEN ships); the plugin pages do not show it yet.
• Fan control: Expected
  Pro only: it uses the same IT5571 embedded controller as the DXP4800 GT with four fans (second CPU fan, second case fan; their registers are from the MIT-licensed noodlemctwoodle plugin), a 25 % floor because the case fan stalls near 20 %, and emergency limits of 88 C CPU and 60 C disk. Not run on a device with this plugin. The plain iDX6011 and iDX6012 have a different fan map: the plugin shows their fan readings (speed, duty, mode) and writes nothing. The Pro LCD backlight can be read and set.
• Case view: Expected
  Drawn after photos, inside after UGREEN's manual; slot numbering assumed. Not compared on a device. The iDX6012 is the pre-launch name of the iDX6011 as far as known.
• Sensors: Expected
• Front panel: Expected

Open the live plugin for the iDX6011 / iDX6012 / Pro