Unraid on UGREEN. Done right.

DXP8800 Plus

Eight bays, two M.2 slots, two 10G LAN ports and two Thunderbolt 4 ports. Fan control after a fan probe.

Community-tested: Nothing verified by a maintainer yet; users confirmed at least one capability.

• LEDs: Community-tested
  LED protocol verified on this model by miskcoo's driver, confirmed by users of this plugin. Evidence
• Fan control: Community-tested Nov 2026
  Fan probe found cpu on pwm2 and the case fans on pwm3 and pwm4; fan control with custom curves confirmed by a user. On 5.2.0 header 4 (pwm4) stayed in automatic mode in the diag. Control register 0x1e of UGREEN's driver confirmed on 5.5.0-next.000133 (2026-11-07, #165): after a restart fan4 ran manual (48 %, 901 rpm, 0x1e = 0x08, bit 7 clear), where 5.4.0 showed it automatic at about 1061 rpm. Evidence
• Case view: Community-tested Nov 2026
  M.2-1, M.2-2 and the internal system slot confirmed by the owner's root-port report (same root ports as the DXP6800 Pro). The PCIe slot port is carried over from the DXP6800 Pro. Evidence
• Sensors: Community-tested Nov 2026
  Temperatures and the dashboard tile confirmed by a user; a one-off -21 °C board reading from the ACPI thermal zone is ignored since 5.1.1. Evidence
• Front panel: Community-tested Nov 2026
  Buttons: the pad registers read 0x84000100 (power) and 0x84000102 (reset), and panel buttons --watch showed power down, press and up and reset down and up. Beeper: the beeper test sounded right after the click. On some boots the BIOS hides the pad registers (0xFF). Evidence

Open the live plugin for the DXP8800 Plus