Unraid on UGREEN. Done right.

DXP480T Plus

All-flash model: no SATA bays, four M.2 slots (shown as drives in the case view), one 10G LAN port. Only the power LED works.

Community-tested: Nothing verified by a maintainer yet; users confirmed at least one capability.

• LEDs: Partly confirmed
  Only the power LED works; the model has no drive bays. A 5.5.0 owner (#271) reports the LEDs do not work there: LED probe failed, 0 LEDs; the power LED blinks white at power-on. Evidence
• Fan control: not offered
  UGREEN's fan driver expects cpu on header 3 and case fans on headers 2 and 4; header 4 is unconfirmed, so there is no fan control.
• Case view: Partly confirmed Nov 2026
  Drawn after UGREEN's manual (front, rear ports, four M.2 slots 01 to 04, two SO-DIMM sockets); which SSD sits in which slot is assumed from the PCIe order. Works on 5.5.0 (#271): no bays, one LAN port and the M.2 drives are listed; the diag found five NVMe drives where the registry has four slots, all shown as plain m2, so the slot order is still unconfirmed. Evidence
• Sensors: Community-tested Nov 2026
  Reported working by an owner on 5.5.0 (#271): CPU temperature check ok (coretemp 55 C), NVMe temperatures read. Evidence
• Front panel: Partly confirmed Nov 2026
  An owner on 5.5.0 (#271) ticked the front panel as working. The diag reads real pad registers (power 0xFD6E0810 = 0x44000100, reset 0xFD6E0770 = 0x44000102) and both buttons read released; a panel buttons --watch test is still open. Evidence

Open the live plugin for the DXP480T Plus