Unraid on UGREEN. Done right.

DXP2800 GT

Two bays (U.2 capable), two M.2 slots, one 10G LAN port. LEDs are enabled but nobody has confirmed them. Case view (front and rear after the product photos, inside after the UGREEN manual); fan control after `/usr/local/emhttp/plugins/ugreen-nas-control/backend/ugreen-nas-fan cs201x confirm` (Chipsea CS201x embedded controller; wiring from the UGREEN driver, confirmed on a device by a community tester).

Community-tested: Nothing verified by a maintainer yet; users confirmed at least one capability.

• LEDs: Expected
  AMD DesignWare I2C controller like the DXP4800 GT, no Intel SMBus; miskcoo's driver for it is work in progress (issues 122, 123). Other tools control all LEDs after the boot-finish write of 1 to 0x20005440 (issue 123), a user reports a month on TrueNAS; our CS201x path does the same write but nobody has run it. Bay order guessed.
• Fan control: Community-tested
  Fan control stays off until you run `/usr/local/emhttp/plugins/ugreen-nas-control/backend/ugreen-nas-fan cs201x confirm`. A community tester (2026-10-31, next channel) saw both fans follow the modes and a custom curve, 1834 rpm (CPU) and 603 rpm (case) at 25 %, and the BIOS speed (about 60 %) back after removing the plugin. Registers and fan roles are from UGREEN's own CS201x driver. 25 % floor, stall point not measured. Evidence
• Case view: Expected
  Inside after UGREEN's manual; slot numbering assumed. Front and rear after the product photos, not compared on a device.
• Sensors: Expected
• Front panel: Expected
  Buttons from UGREEN's driver source; the vendor driver has no beeper for this model.

Open the live plugin for the DXP2800 GT